Asbestos removal and sandwich panel roofs: key points for construction in Spain

January 8, 20254 min readNews
Asbestos removal and sandwich panel roofs: key points for construction in Spain

ARTICLE

Asbestos, widely used in construction for decades because of its low cost and durability, has become a cause for concern due to the health risks it poses. Although it presents no immediate danger when stable, when it is handled it can release toxic fibres that seriously affect the respiratory system.

In Spain, legislation requires its safe removal in the case of refurbishments, works or demolitions that involve handling it. This process, known as asbestos removal, must be carried out under strict safety measures to protect both workers and the environment.

In this article we analyse the risks associated with asbestos, explain what asbestos removal involves and highlight how sandwich panels are a modern, efficient solution for renewing roofs safely and sustainably.

Asbestos in construction: use and risks

Asbestos, known for its excellent thermal insulating properties and its resistance to high temperatures, was widely used in construction until it was banned in Spain in 2002.

Materials such as Uralita (asbestos-cement sheeting), which contained this mineral, were common in industrial buildings, factories and other buildings because of their cost-effectiveness and ease of installation.

However, asbestos presents a key problem: when it is handled it releases microscopic fibres that can be inhaled. These fibres are very dangerous to health, as they can accumulate in the lungs and cause diseases such as asbestosis, mesothelioma or lung cancer, especially after prolonged exposure. Nevertheless, it is important to stress that, if it is not disturbed or handled, asbestos in a stable state does not pose an immediate risk.

In Spain, current regulations prohibit its use and stipulate that it must be removed safely by certified companies in the case of refurbishments, maintenance works or demolitions.

The handling and disposal of asbestos must be carried out under strict controls that minimise the risks to health and the environment.

Industrial asbestos removal: the process for removing asbestos safely and effectively

Asbestos removal is the process of identifying, removing and disposing in a controlled manner of materials containing asbestos. In Spain, this procedure is regulated by Real Decreto 396/2006 (Royal Decree 396/2006), which sets out the safety measures to protect workers and the public during these operations.

Although asbestos removal is also carried out in residential buildings, industrial facilities present specific conditions and requirements due to the size, location and condition of the materials.

In general terms, these are the steps for an asbestos removal operation in an industrial facility:

Preparation and planning

This phase is essential to ensure that asbestos removal is carried out safely and effectively. To begin with, a thorough site inspection is carried out to identify all areas and materials containing asbestos, also assessing their state of deterioration and the potential for fibre release.

In industrial facilities, it is particularly important to define the risk areas and plan access to and temporary closure of the affected zones, as these are large spaces that are often in use.

Once the areas of intervention have been identified, a detailed work plan is drawn up, including the necessary equipment, the removal methods and the protective measures for staff.

In addition, the project costs and timescales are estimated, and any temporary closures or restrictions are communicated in advance to workers and users of the facility.

Asbestos removal

The asbestos removal process must comply with current regulations in Spain and the European Union, which require extremely careful handling of the material to prevent fibres from dispersing into the air.

The personnel carrying out the work must be qualified and equipped with protective suits, respirators and specific tools. The removal procedure may vary depending on the location and type of asbestos, but in all cases techniques are applied to minimise the risk of fibre release.

In industrial facilities, where asbestos-cement roofs usually cover large areas, the removal process may involve the use of cranes and mobile elevating work platforms to access areas at height.

The removed asbestos is packed in special containers that comply with regulations and labelled as hazardous waste.

>> Case study: refurbishment of an industrial building, including asbestos removal.

Waste management

Asbestos removal does not end with taking the material off the structure: proper management of asbestos waste is essential.

According to the regulations, this waste must be transported to specialised facilities for safe treatment.

Companies responsible for asbestos removal in this type of facility must ensure compliance with all hazardous waste traceability requirements, and issue the necessary certificates to prove that the asbestos has been managed properly and with respect for the environment.

Replacing asbestos-cement sheeting with sandwich panels

Once the asbestos has been safely removed, one of the most advisable solutions is to install sandwich panels in place of the old asbestos-cement sheeting.

This material is ideal for industrial facilities because of its thermal and acoustic insulation properties, as well as its weather resistance and low maintenance. It is what we usually use at ALTERTECNIA in projects like this one.

Sandwich panel is a building material made up of two rigid outer skins enclosing an insulating core, usually polyurethane or rock wool. This construction offers excellent thermal and acoustic insulation, as well as strength and durability.

For information on this or other interventions to improve your company's facilities, contact our team. At ALTERTECNIA we provide architecture and engineering solutions for any project you have in mind to improve your business. Call us for a no-obligation consultation.

Share LinkedIn WhatsApp Email
ALTERTECNIA · Engineering · Architecture · ConsultingOctober 28, 2026
Technical enquiry

Planning a project?

Tell us about the space and the activity. We will reply with a first technical and legal assessment.

Write to us 93 193 93 09
Email
marketing@altertecnia.com
Office
Edificio BMC, Ronda Maiols 1, local 119
08192 Sant Quirze del Vallès, Barcelona
View on Google Maps ↗
LinkedIn · ALTERTECNIA